This compact 1‑foot UV strip delivers concentrated 365nm output in a slim, linkable package. Designed for display lighting and targeted UV tasks, the bar emphasizes deeper ultraviolet wavelengths that reveal faint fluorescence missed by longer‑wavelength black lights. The kit comes as a two‑pack with mounting hardware and connection cables for expandable layouts.
Key features at a glance
- 365nm wavelength: Emits deep UV that is largely invisible to the eye but produces vivid fluorescence on suitable materials.
- 48 high‑quality 2835 LEDs: Dense LED array for consistent coverage along the 31cm (1ft) length.
- 15W power per bar: Stronger output than typical low‑power strips intended for decorative use.
- Linkable design: Includes connectors and a longer cable so you can join multiple bars for seamless illumination.
- Magnetic and screw mounting: Aluminum housing for heat dissipation with non‑drill magnetic install plus hardware for permanent mounts.
- Accessories included: Two bars, one long connecting cable, short connectors, two on/off switch cables, an extra direct cable (AC 85–265V) and mounting pieces.
Technical details and what they mean
- Wavelength — 365nm: This sits deeper in the ultraviolet band than 395nm bulbs. It tends to produce stronger fluorescence on uranium glass, minerals, and certain optical brighteners while remaining mostly non‑visible as light to observers.
- LED type — 2835: Small surface‑mount diodes used to pack many emitters into a short bar for even UV distribution.
- Length and construction: Roughly 31cm (1ft) long with an aluminum shell that helps dissipate heat and adds rigidity for mounting.
- Electrical: Supplied cabling supports a wide AC input range (AC 85–265V) via the included connecting options, allowing flexible installation locations.
Package contents (useful checklist)
- 2 × 1ft 365nm UV bars
- 1 × long connecting cable
- 2 × short connectors
- 2 × ON/OFF switch cables
- 1 × extra direct connecting cable (AC 85–265V)
- Mounting hardware
Installation and setup tips
The bar’s magnetic mounting makes temporary placement fast — just snap it to a metal surface for under‑shelf or cabinet lighting. For a more permanent fit, use the supplied screws. When using a single bar by itself, install the short connector on the unused end to maintain safe electrical configuration.
Multiple bars can be linked together with the included cables to cover wider displays or longer shelving runs. The on/off switch cable lets you control each bar individually without rewiring the main feed.
Practical uses and ideal scenarios
This 365nm strip is intended for situations where deeper UV detection or display glow is needed rather than general room lighting. Common uses include:
- Illuminating uranium glass, fluorescent minerals and rock collections in curio cabinets or museum cases.
- Backlighting resin pieces or small art installations where subtle fluorescence is desired.
- Short‑duration inspections such as detecting certain stains, counterfeit features, or small critters that fluoresce under deep UV.
- Accent lighting for themed displays, glow parties, or Halloween effects where a nearly invisible light source is preferred.
If you need a compact curing or gel lamp for nail work, consider a handheld UV/LED option like the 2 in 1 Mini UV/LED Lamp for targeted gel curing and flash cures; 2 in 1 Mini UV/LED Lamp.
Limitations and realistic expectations
Because 365nm is deeper into the ultraviolet range, the light itself is almost invisible; you may see only a very faint purple. This makes it excellent for revealing fluorescence but less useful if you want an obvious visible glow to attract attention from across a room.
Also note that 365nm output differs from the more common 395nm black lights: some materials respond more strongly to one wavelength than the other. The bar is designed to reveal faint fluorescence that 395nm sources might miss, but it won’t produce the same visible violet effect that other decorative black lights deliver.
Safety guidance
- Protect your eyes and skin: The bar emits deep UV. Always wear UV‑blocking safety glasses when operating the lights for inspection or close work.
- Avoid direct exposure: Do not look directly into the LED array or expose bare skin to the bar for extended periods.
- Use briefly and in ventilated areas: Limit continuous operation during close‑range tasks and ensure good ventilation if you are working in confined spaces.
Who should consider this bar?
This product fits collectors, hobbyists, curio cabinet owners, and anyone who needs concentrated 365nm illumination in a compact, linkable format. Its magnetic mounting and linkable cables make it suited to display cases, shelving runs, or staged effects where neat installation and modular expansion are required.
Conclusion
The 1ft 365nm black light bar offers concentrated deep‑UV output in a small, modular package. With 48 2835 LEDs, an aluminum housing for heat management, and a two‑bar kit that includes connectors and switches, it works well for focused display lighting and tasks that benefit from 365nm fluorescence. Listed price: USD 25.99; prices may change.
Final note
Follow the included installation guidance and safety recommendations to get reliable performance while protecting eyes and skin during use.